Scotsman SLE400 Manuál

IntroductionTo the owner or user: This product manual is asource of information about the installation, startup, cleaning, maintenance and repair of t

Service DiagnosisPROBLEM POSSIBLE CAUSE PROBABLE FIXDoes not vend No ice Check ice machineNo power Check power supplyVend switch open Check/replace ve

Removal and ReplacementGear Motor1. Disconnect electrical power2. Locate key and remove sink.3. Disconnect wires at gearmotor4. Mark position of cam s

Specifications:Limitations:••Must meet the same limitations as the cuberinstalled on top of it: 550F. air minimum, 1000F. air maximum. ••Must be insta

Installation: GeneralAfter the carton has been removed from thedispenser, the legs may be installed.Place flat portions of the carton on the floor beh

Installation: Ice MachineCheck that gasket tape has been placed at theoutside edge of the dispenser top.Place corner posts from the carton on top of t

Kits: Coin Mechanism (KSLDC2)A kit is available to install a coin mechanism, andanother kit is available to install a room keymechanism. Both come wit

Key Kit Installation: (KSLDK2)1. Disconnect electrical power2. Remove sink and drain pan.3. Remove cover.4. Remove control box cover5. From kit, locat

Final Check List/Initial Start Up1. Check that electrical power has been supplied.2. Check that a drain, separate from the icemachine, insulated and m

Operational SchematicIce MachineIce ChuteGear MotorSinkDrain PanCondensate PanDrainStorage BinBin ThermostatSLD150October 1996Page 8

CleaningGeneral Care and CleaningPeriodically inspect and clean the ice dispenser tokeep it operating at peak performance.Wash the outside of the disp